Radial Arm Drill Press logo

Radial Arm Drill Press

Call Toll Free @ 800-575-2843		 Radial Arm Drill Press logo
Home
Page		 Standard Radial
Arm Drill Presses		 Medium Radial Arm Drill Presses Heavy Duty Radial
Arm Drill Presses		All Drill
Presses 		Radial Arm
Drills Accessories		 Radial Arm
Drills User Guides		 Parts &
Operation Manuals

Heavy Duty Radial Arm Drill Presses

Quick Links: Model CL1600H | Model CLC1600H | Model CL2000H | Model CLC2500

Model CL 1600H Radial Arm Drill Press

Standard Features

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting.
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear.
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation.
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage.
  • Coolant system
  • CSA Electrics Standard
  • Tool kit and manuals
PDF Version		 Model CL 1600H Radial Arm Drill Press
Model CL 1600H Radial Arm Drill Press
Specifications & Dimensions
Specifications and Dimensions
Model CL1600H
Working Area Drill Head
Column Sleeve Dia. (E) 17" (432mm) Spindle Taper 5MT
Column Face to Spindle Center Spindle Stroke 14.6" (370mm)
  Maximum (D+C) 62.2" (1580mm) Quill Diameter 3.94" (100mm)
  Minimum (D) 17.3" (440mm) Number of Spindle Speeds 12
  Spindle Head Travel (C) 44.9" (1140mm) Spindle Speeds (rpm) 40-1920
Base Surface to Spindle End Number of Feeds 6
  Maximum (A) 63" (1600mm) Spindle Feed Rate (in(mm)/rev.) 0.003"(.07mm)-0.038"(.96mm)
  Minimum (B) 15" (380mm) Spindle Drive Motor (2-speed) 7.5 hp (5.6 Kw)
Arm Vertical Travel (A-B) 33.5" (850mm) Elevating Motor 2 hp (1.5 Kw)
Arm Rotation (Right & Left) 180° Clamping Motor 1 hp (.75 Kw)
Baseplate Working Surface 70.9" x 40.4" (1800 x 1026mm) Coolant Pump Motor 1/8 hp (.10 Kw)
Box Table Area  
  Length (L) 27.6" (700mm) Capacities
  Width (K) 19.7" (500mm) Drilling In Steel 2.6" (65mm)
  Height (H) 15.7" (400mm) Drilling In Cast Iron 2.75" (70mm)
Base Dimensions Tapping In Steel 1.97" (50mm)
  Floor Area (R x S) 97.6" x 41.3" (2480 x 1050mm) Tapping In Cast Iron 2.36" (60mm)
  Height (Q) 8.26" (210mm) Boring In Steel 5" (126mm)
    Boring In Cast Iron 7.28" (185mm)
Dimensions/Weights
Max. Machine Height (F) 124.8" (3170mm)  
Base and Column Height (G) 107.7" (2660mm)
Shipping Dimensions
(L x W x H)		 112.2" (2850mm) x 55.1" (1400mm) x 115.7" (2940mm)
Net Weight 6,614 lbs. (4900kg)
Shipping Weight 11,243 lbs. (5100kg)


Model CLC1600H Radial Arm Drill Press

Standard Features

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
  • Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Coolant system
  • CSA Electrics Standard
  • Tool kit and manuals
PDF Version		 Model CLC1600H Radial Arm Drill Press
Model CLC1600H Radial Arm Drill Press
Specifications & Dimensions
Specifications and Dimensions
Model CLC1600H
Working Area Drill Head
Column Sleeve Dia. (E) 12.61" (320mm) Spindle Taper 5MT
Column Face to Spindle Center Spindle Stroke 10.63" (270mm)
  Maximum (D+C) 63.00" (1600mm) Quill Diameter 3.15" (80mm)
  Minimum (D) 13.78" (350mm) Number of Spindle Speeds 12
Spindle Head Travel (C) 49.21" (1250mm) Spindle Speeds (rpm) 56-1450
Base Surface to Spindle End Number of Steps 3
  Maximum (A) 55.90" (1420mm) Spindle Feed Rate (in(mm)/rev.) 0.0023"(.06mm), 0.004"(.10mm), 0.008"(.20mm)
  Minimum (B) 18.31" (465mm) Spindle Drive Motor (2-speed) 5 hp (3.8 Kw)
Arm Vertical Travel (A-B) 26.77" (680mm) Elevating Motor 1 hp (.75 Kw)
Arm Rotation (Right & Left) 180° Coolant Pump Motor  
Baseplate Working Surface 70.9" x 40.4"(1800 x 1026mm)  
Box Table Area Capacities
  Length (L) 24.8" (630mm) Drilling In Steel 3.15" (80mm)
  Width (K) 19.7" (500mm) Drilling In Cast Iron 3.98" (100mm)
  Height (H) 19.7" (500mm) Tapping In Steel 2.56" (65mm)
Base Dimensions Tapping In Cast Iron 2.95" (75mm)
Floor Area (R x S) 100.4" x 38.2"(2550 x 970mm) Boring In Steel 6" (150mm)
Height (Q) 7.9" (200mm) Boring In Cast Iron 10" (250mm)
   
Dimensions/Weights
Max. Machine Height (F) 108.7" (2760mm)  
Base and Column Height (G) 86.1" (2186mm)
Shipping Dimensions
(L x W x H)		 105.2" (2670mm) x 44.1" (1120mm) x 94.9" (2410mm)
Net Weight 7,275 lbs. (3300kg)
Shipping Weight 8,378 lbs. (2800kg)


Model CL 2000H Radial Arm Drill Press

Standard Features

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting.
  • Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear.
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation.
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage.
  • Coolant system
  • CSA Electrics Standard
  • Tool kit and manuals
PDF Version		 Model CL 2000H Radial Arm Drill Press
Model CL 2000H Radial Arm Drill Press
Specifications & Dimensions
Specifications and Dimensions
Model CL2000H
Working Area Drill Head
Column Sleeve Dia. (E) 17" (432mm) Spindle Taper 5MT
Column Face to Spindle Center Spindle Stroke 14.6" (370mm)
  Maximum (D+C) 62.2" (1580mm) Quill Diameter 3.94" (100mm)
  Minimum (D) 17.3" (440mm) Number of Spindle Speeds 12
  Spindle Head Travel (C) 44.9" (1140mm) Spindle Speeds (rpm) 40-1920
Base Surface to Spindle End Number of Feeds 6
  Maximum (A) 63" (1600mm) Spindle Feed Rate (in(mm)/rev.) 0.003"(.07mm)-0.038"(.96mm)
  Minimum (B) 15" (380mm) Spindle Drive Motor (2-speed) 7.5 hp (5.6 Kw)
Arm Vertical Travel (A-B) 33.5" (850mm) Elevating Motor 2 hp (1.5 Kw)
Arm Rotation (Right & Left) 180° Clamping Motor 1 hp (.75 Kw)
Baseplate Working Surface 70.9" x 40.4" (1800 x 1026mm) Coolant Pump Motor 1/8 hp (.10 Kw)
Box Table Area  
  Length (L) 27.6" (700mm) Capacities
  Width (K) 19.7" (500mm) Drilling In Steel 2.6" (65mm)
  Height (H) 15.7" (400mm) Drilling In Cast Iron 2.75" (70mm)
Base Dimensions Tapping In Steel 1.97" (50mm)
  Floor Area (R x S) 97.6" x 41.3" (2480 x 1050mm) Tapping In Cast Iron 2.36" (60mm)
  Height (Q) 8.26" (210mm) Boring In Steel 5" (126mm)
    Boring In Cast Iron 7.28" (185mm)
Dimensions/Weights
Max. Machine Height (F) 124.8" (3170mm)  
Base and Column Height (G) 107.7" (2660mm)
Shipping Dimensions
(L x W x H)		 112.2" (2850mm) x 55.1" (1400mm) x 115.7" (2940mm)
Net Weight 6,614 lbs. (4900kg)
Shipping Weight 11,243 lbs. (5100kg)


Model CLC 2500 Radial Arm Drill Press

Standard Features

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Coolant system
  • CSA Electrics Standard
  • Tool kit and manuals
PDF Version		 Model CLC 2500 Radial Arm Drill Press
Model CLC 2500 Radial Arm Drill Press
Specifications & Dimensions
Specifications and Dimensions
Model CLC2500
Working Area Drill Head
Column Sleeve Dia. (E) 21.65" (550mm) Spindle Taper 6MT
Column Face to Spindle Center Spindle Stroke 17.7" (450mm)
  Maximum (D+C) 98.4" (2500mm) Quill Diameter 3.94" (100mm)
  Minimum (D) 19.7" (500mm) Number of Spindle Speeds 16
Spindle Head Travel (C) 78.7" (2000mm) Spindle Speeds (rpm) 16-1250
Base Surface to Spindle End Number of Steps 16
  Maximum (A) 78.7" (2000mm) Spindle Feed Rate (in(mm)/rev.) 0.0015"(.04mm)-0.126"(3.20mm)
  Minimum (B) 21.6" (550mm) Spindle Drive Motor (2-speed) 10 hp (7.5 Kw)
Arm Vertical Travel (A-B) 39.4" (1000mm) Elevating Motor 5 hp (3.6 Kw)
Arm Rotation (Right & Left) 180° Coolant Pump Motor 1/4 hp (.18 Kw)
Baseplate Working Surface 86.8" x 43.4" (2205 x 1102mm)  
Box Table Area Capacities
  Length (L) 39.4" (1000mm) Drilling In Steel 3.15" (80mm)
  Width (K) 31.5" (800mm) Drilling In Cast Iron 3.98" (100mm)
  Height (H) 22" (560mm) Tapping In Steel 2.56" (65mm)
Base Dimensions Tapping In Cast Iron 2.95" (75mm)
Floor Area (R x S) 138.6" x 55.1" (3520 x 1400mm) Boring In Steel 6" (150mm)
Height (Q) 12.6" (320mm) Boring In Cast Iron 10" (250mm)
   
Dimensions/Weights
Max. Machine Height (F) 157" (3990mm)  
Base and Column Height (G) 151.6" (2660mm)
Shipping Dimensions
(L x W x H)		 158" (4000mm) x 63" (1600mm) x 151.6" (3850mm)
Net Weight 24,250 lbs. (11000kg)
Shipping Weight 27,557 lbs. (12500kg)