Standard Duty Radial Arm Drill Presses

Model CL720A Radial Arm Drill Press

Standard Features

Limit switch
Interlocked end guard door for easy access for maintenance & changing end train gears
High speed gears are made of Nickel-Chrome Steel & are heat-treated & ground for durability
Powerful 2 Hp spindle drive motor for heavy-duty cutting
Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874"
Special spindle balance mechanism, superior to traditional balance mechanism & extends Balance Spring life
Coolant system
Low volt & overload protection
CSA Electrics Standard
Tool kit & manuals

Model CL720A Radial Arm Drill Press

Specifications & Dimensions

Model CL720A


Working Area		Drill Head
Column Sleeve Dia. (E)	8.28" (210mm)	Spindle Taper	4MT
Column Face to Spindle Center		Spindle Stroke	8.66" (220mm)
Maximum (D+C)	29.5" (750mm)	Quill Diameter	2.95" (75mm)
Minimum (D)	8.7" (220mm)	Number of Spindle Speeds	6
Spindle Head Travel (C)	20.8" (530mm)	Spindle Speeds (rpm)	88, 154, 282, 455, 796, 1500
Base Surface to Spindle End		Number of Feeds	3
Maximum (A)	41.7" (1060mm)	Spindle Feed Rate (in/rev.)	0.002"/0.0035"/0.006"
Minimum (B)	10.2" (260mm)	(mm/rev.)	.05mm/.09mm/.15mm
Arm Vertical Travel (A-B)	22.8" (580mm)	Spindle Drive Motor	2 hp (1.5 Kw)
Arm Rotation (Right & Left)	180°	Elevating Motor	1 hp (.75 Kw)
Baseplate Working Surface	35.5" x 25.3" (902x643mm)	Coolant Pump Motor	1/8 hp (.10 Kw)
Box Table Area
Length (L)	23.6" (600mm)	Capacities
Width (K)	17.5" (445mm)	Drilling In Steel	1.26" (32mm)
Height (H)	15" (380mm)	Drilling In Cast Iron	2" (50mm)
Base Dimensions		Tapping In Steel	1" (25mm)
Floor Area (R x S)	49.6" x 25.2" (1260x640mm)	Tapping In Cast Iron	1.26" (32mm)
Height (Q)	6.5" (160mm)	Boring In Steel	2.75" (70mm)
		Boring In Cast Iron	4.06" (105mm)
Dimensions/Weights
Max. Machine Height (F)	85.4" (2170mm)
Base & Column Height (G)	72.8" (1850mm)
Shipping Dimensions (L x W x H)	66.1" (1680mm) x 32.5" (826mm) x 85" (2160mm)
Net Weight	2,469 lbs. (1120kg)
Shipping Weight	2,756 lbs. (1250kg)

Standard Features

Limit switch
Interlocked end guard door for easy access for maintenance & changing end train gears
High speed gears are made of Nickel-Chrome Steel & are heat-treated & ground for durability
Powerful 2 Hp spindle drive motor for heavy-duty cutting
Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874"
Special spindle balance mechanism, superior to traditional balance mechanism & extends Balance Spring life
Coolant system
Low volt & overload protection
CSA Electrics Standard
Tool kit & manuals

Model CL820A Radial Arm Drill Press

Specifications & Dimensions


Working Area	Drill Head
Column Sleeve Dia. (E)	8.28" (210mm)	Spindle Taper	4MT
Column Face to Spindle Center		Spindle Stroke	8.66" (220mm)
Maximum (D+C)	33.5" (850mm)	Quill Diameter	2.95" (75mm)
Minimum (D)	8.7" (220mm)	Number of Spindle Speeds	6
Spindle Head Travel (C)	24.8" (630mm)	Spindle Speeds (rpm)	88, 154, 282, 455, 796, 1500
Base Surface to Spindle End		Number of Feeds	3
Maximum (A)	47.6" (1270mm)	Spindle Feed Rate (in/rev.)	0.002" 0.0035" 0.006"
Minimum (B)	13.8" (350mm)	(mm/rev.)	(.05mm), (.09mm), (.15mm)
Arm Vertical Travel (A-B)	25.2" (640mm)	Spindle Drive Motor	2 hp (1.5 Kw)
Arm Rotation (Right & Left)	180°	Elevating Motor	1 hp (.75 Kw)
Baseplate Working Surface	35.5" x 25.3" (902x643mm)	Coolant Pump Motor	1/8 hp (.10 Kw)
Box Table Area
Length (L)	23.6" (600mm)	Capacities
Width (K)	17.5" (445mm)	Drilling In Steel	1.26" (32mm)
Height (H)	15" (380mm)	Drilling In Cast Iron	2" (50mm)
Base Dimensions		Tapping In Steel	1" (25mm)
Floor Area (R x S)	49.6" x 25.2" (1260x640mm)	Tapping In Cast Iron	1.26" (32mm)
Height (Q)	6.5" (160mm)	Boring In Steel	2.75" (70mm)
		Boring In Cast Iron	4.06" (105mm)
Dimensions/Weights
Max. Machine Height (F)	91.3" (2170mm)
Base & Column Height (G)	79.1" (2010mm)
Shipping Dimensions (L x W x H)	66.1" (1680mm) x 32.5" (826mm) x 86.2" (2190mm)
Net Weight	2,645 lbs. (1200kg)
Shipping Weight	2,954 lbs. (1340kg)

Standard Features

Limit switch
High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability
Powerful 2 Hp spindle drive motor for heavy-duty cutting
Extra auxiliary dial for spindle feed depth indication, allows review of spindle feed depth, .0394" to 7.874"
Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
Coolant system
Low volt and overload protection
CSA Electrics Standard
Tool kit and manuals

Model CL920A Radial Arm Drill Press

Specifications & Dimensions


Working Area	Drill Head
Column Sleeve Dia. (E)	8.28" (210mm)	Spindle Taper	4MT
Column Face to Spindle Center		Spindle Stroke	8.66" (220mm)
Maximum (D+C)	37.4" (950mm)	Quill Diameter	2.95" (75mm)
Minimum (D)	8.7" (220mm)	Number of Spindle Speeds	6
Spindle Head Travel (C)	28.7" (730mm)	Spindle Speeds (rpm)	88, 154, 282, 455, 796, 1500
Base Surface to Spindle End		Number of Feeds	3
Maximum (A)	47.6" (1210mm)	Spindle Feed Rate (in/rev.)	0.002"/0.0035"/0.006"
Minimum (B)	13.8" (350mm)	(mm/rev.)	.05mm/.09mm/.15mm)
Arm Vertical Travel (A-B)	25.2" (640mm)	Spindle Drive Motor	2 hp (1.5 Kw)
Arm Rotation (Right & Left)	180°	Elevating Motor	1 hp (.75 Kw)
Baseplate Working Surface	35.5" x 25.3" (902x643mm)	Coolant Pump Motor	1/8 hp (.10 Kw)
Box Table Area
Length (L)	23.6" (600mm)	Capacities
Width (K)	17.5" (445mm)	Drilling In Steel	1.26" (32mm)
Height (H)	15" (380mm)	Drilling In Cast Iron	2" (50mm)
Base Dimensions		Tapping In Steel	1" (25mm)
Floor Area (R x S)	49.6" x 25.2" (1260x640mm)	Tapping In Cast Iron	1.26" (32mm)
Height (Q)	6.5" (160mm)	Boring In Steel	2.75" (70mm)
		Boring In Cast Iron	4.06" (105mm)
Dimensions/Weights
Max. Machine Height (F)	91.3" (2320mm)
Base and Column Height (G)	79.1" (2010mm)
Shipping Dimensions (L x W x H)	71.1" (1806mm) x 32.5" (826mm) x 86.2" (2190mm)
Net Weight	2,756 lbs. (1250kg)
Shipping Weight	3,086 lbs. (1400kg)